Origin Storage N8800+ & 8x3TB HDD User Manual download pdf (Page 66)

66

DHCP Server Configuration

A DHCP server can be configured to assign IP addresses to devices connected to the

LAN2 port. To configure these ports, choose LAN2 from the System Network

menu.

DHCP Configuration

Item Description

DHCP Server Enable or disable the DHCP server to automatically assign IP

address to PCs connected to the LAN2 interface.

Start IP Specifies the starting IP address of the DHCP range.

End IP Specifies the ending IP address of the DHCP range.

DNS Server Displayed the DNS server IP address.

Storage Management

The Storage menu displays the status of storage devices installed in the Thecus IP

storage, and includes storage configuration options such as RAID and disk settings,

folder configuration, space allocation and ISO Mount.

Disks Information

From the Storage menu, choose the Disks item and the Disks Information

screen appears. From here, you can see various items about installed SATA hard

disks. Blank lines indicate that a SATA hard disk is not currently installed in that

particular disk slot.

NOTE

The IP Segment of WAN/LAN1 and LAN2 should not overlap.

WARNING

The IP address of the LAN2 interface should not be in the range of the

Start IP address and End IP address.

NOTE

• The screen shot below just example from Thecus IP Storage. The disk

slots can from 4 to 8 depend on the model of Thecus IP storage.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 167 168

Comments to this Manuals

No comments