Origin Storage N4100PRO User Manual download pdf (Page 14)

Cable Connections

Make the following connections on the Thecus N4100PRO and then power up the

unit:

1. Connect an Ethernet cable from your network to the WAN port on the back

panel of the N4100PRO.

2. Connect the provided power cord into the universal power socket on the

back panel. Plug the other end of the cord into a surge protected socket.

3. Press the power button on the front panel to power on the N4100PRO.

Checking System Status

After making connections on the N4100PRO and powering up, check whether the

system status is normal or has trouble by observing indicators on the front panel

and hard disk trays.

System Status Normal

The system status is normal if:

1. The front panel Power LED glows blue and the WAN LED glows or blinks

green.

2. The HDD Power LED on each HDD tray glows blue.

System Trouble

The system has trouble if:

1. Any LED glows red.

1. The system emits a continuous beeping sound.

If the system has trouble, please refer to Chapter 8: Troubleshooting.

WARNING

There are no user serviceable parts inside the N4100PRO. Please contact

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 138 139

No comments

Origin Storage N4100PRO User Manual Page 14