Origin Storage N4100PRO User Manual download pdf (Page 108)

Replacing Damaged Hard Drives

If you are using RAID 1, RAID 5, RAID 6, or RAID 10, you can easily replace a

damaged hard drive in the Thecus N4100PRO while keeping your data secure with

e system’s automatic data recovery.

To replace a hard disk drive in the N4100PRO:

4100PRO until it snaps into place.

You can also lock it with a key if desired.

is accessed.

4100PRO, you can use the auto-rebuild

is detected.

which disk has failed.

3. Follow the steps mentioned above to replace the failed hard disk.

the

auto-rebuild sequence to resume its status before the hard disk crash.

Hard Drive Damage

When a hard drive is damaged and data in the RAID volume, the system LCD will

display warning message also the system beeps.

Replacing a Hard Drive

1. Remove the tray with the damaged hard disk.

2. Unscrew the damaged hard disk and remove it from the tray.

3. Slide a new hard disk into the tray and fasten the screws.

4. Insert the hard disk tray back into the N

5. The LED blinks green when the HDD

RAID Auto-Rebuild

When using RAID 1, 5, 6, or 10 on the N

function when an error

1. When a hard disk fails the system beeps and/or an email notification is sent

to specified receivers.

2. Check the LCD to see

4. The system automatically recognizes the new hard disk and starts

108

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 138 139

No comments

Origin Storage N4100PRO User Manual Page 108